Cleaning Products
Enhance your cleaning operations with Desco's specialized pressure washing chemicals. Designed for industrial and commercial applications, our products ensure optimal performance and efficiency.
DC-111 E
Acid Cleaner Activator
A concentrated acid solution, specifically intended as one part of a two part chemical cleaning system. It is intended as a pre-cleaner for the removal of road dirt and oxide on painted and non-painted aluminum trailers.
DC-111 E is diluted until the concentration of “pure” solution coming out the spray gun is approximately 1:25. Apply the DC-111 E to the work surface starting from the bottom and working up.
DC-60
Super Shine Aluminum Brightener
Contains hydroflouric acid
Intended for the cleaning and brightening of unpainted, over-the-road ALUMINUM (truck) TRAILERS. It also works well on painted trailers, concrete floors, bricks, and for the cleaning of fiberglass boats. GLASS, ANODIZED ALUMINUM, and other nonferrous metals will be etched by DC-60. Extreme care should be exercised in the handling and use of DC-60, as it is a strong acid cleaner containing hydrofluoric acid and having an acrid, irritating odor.
DC-60 must be applied with a down stream chemical injector to avoid damage to your pressure washer. DC-60 is most effective when used at a 1:25 ratio, but may be diluted as much as 1:75. For more information contact our office.
DC-44
Truck Wash
Excellent hard surface cleaner, with wetting agents and high alkalinity for increased results. It is commonly used for the washing of cars, trucks, walls, floors, and will remove a wide spectrum of organic and inorganic soils such as road dirt, clay, salt and petroleum exhaust films. DC-44 is used where a cleaner is desired that has no caustics. DC-44 is applied to the work surface using a DESCO High Pressure Washer. The dilution adjustment control on the pressure washer is used to adjust the strength of the chemical with a thorough fresh water rinse.DC-116 E
Truck Wash Detergent
DC-116 E is applied to the work surface using a DESCO High Pressure Washer, the FUTRA-SSA Touchless Automatic Truck Wash for the over-the-road trucks. The dilution adjustment control on the washing equipment is used to adjust the strength of the DC-116 E being applied from 1:25 to 1:75.
If in doubt about the wisdom of using this product in your applications, spot clean a small test area before proceeding with your cleaning project. Always follow the application of chemical with a thorough fresh water rinse.
DC-10
Extra Heavy Duty Degreaser
This product is an excellent hard surface cleaner, with wetting agents and high alkalinity for increased
results. It is commonly used for the washing of cars, trucks, walls, floors, and will remove a wide spectrum
of organic and inorganic soils such as road dirt, clay, salt and petroleum exhaust films. DC-10 is used
where a cleaner is desired that has no caustics.
DC-10 is applied to the work surface using a DESCO High Pressure Washer. The dilution adjustment
control on the pressure washer is used to adjust the strength of the chemical with a thorough fresh water
rinse.
DC-12
Extra Heavy Duty Degreaser
This product is an excellent hard surface cleaner, with wetting agents and high alkalinity for increased results. It is
commonly used for the trucks, walls, floors, and will remove a wide spectrum of organic and inorganic soils such as
road dirt, clay, salt and petroleum exhaust films. DC-12 is used where a cleaner is desired that has no caustics.
DC-12 is applied to the work surface using a DESCO High Pressure Washer. The dilution adjustment control on the
pressure washer is used to adjust the strength of the chemical with a thorough fresh water rinse.
DC-14 E
Floor Cleaner
An excellent hard surface cleaner with wetting agents and high alkalinity for increased results. This product has been formulated to meet a wide variety of cleaning needs. It is excellent for use in automatic floor scrubbing machines. DC-14 E will remove heavy soils, oils, greases, tire marks, etc. from concrete, brick, ceramic tile, terrazzo, and other hard floors. Just dilute as needed with water.
DC-14 E should be applied full strength to engine and chassis when used as a degreaser. The strength of this working mixture depends on the condition of the surface to be cleaned. You may apply the chemical to the work surface using an application with a thorough fresh water rinse.
Contact Us
For product inquiries or to place an order, please reach out to us at info@descoequip.com or call (704) 873-2844.